KATO Fastening Systems, Inc.

Tangless Air Tools

	KATO Air-Driven Installation Tools for Tangless CoilThread Inserts






	The air tool consists of three major components: The air motor The adapter The FEA (Front End Assembly)	Don't forget to order a Filter-Regulator-Lubricator (FRL) for each air motor. Part Number: CT25020
	Special Notes: All three components are required to install tangless inserts with the air tool. Each thread size will require a different Front End Assembly (FEA). A Filter-Regulator-Lubricator must be connected to each air motor in operation. IMPORTANT: For thread sizes 2-56, 4-40, M2.5 and M3 the Clutch Drive must be used to prevent the mandrels from breaking.

Nominal Thread Size	FEA COMPONENTS			Adapter	Air Motor	FRL
Nominal Thread Size	Front End Assembly	Replacement Mandrel Assembly	Replacement Pawl	Adapter	Air Motor	FRL
UNC - UNIFIED COARSE
2-56	2CT11000-02	2CT11200-02	2CT11400-02	CT9605	CT25017	CT25020
4-40	2CT11000-04	2CT11200-04	2CT11400-04
6-32	2CT11000-06	2CT11200-06	2CT11400-06
8-32	2CT11000-2	2CT11200-2	2CT11400-2
10-24	2CT11000-3	2CT11200-3	2CT11400-3
1/4-20	2CT11000-4	2CT11200-4	2CT11400-4
5/16-18	2CT11000-5	2CT11200-5	2CT11400-5	CT9705
3/8-16	2CT11000-6	2CT11200-6	2CT11400-6	CT9705
UNF - UNIFIED FINE
10-32	2CT11001-3A	2CT11201-3A	2CT11401-3A	CT9605	CT25017	CT25020
1/4-28	2CT11001-4	2CT11201-4	2CT11401-4	CT9605
5/16-24	2CT11001-5	2CT11201-5	2CT11401-5	CT9705
3/8-24	2CT11001-6	2CT11201-6	2CT11401-6	CT9705
METRIC
M2.5	2CT11000-M2.5	2CT11200-M2.5	2CT11400-M2.5	CT9605	CT25017	CT25020
M3	2CT11000-M3	2CT11200-M3	2CT11400-M3
M4	2CT11000-M4	2CT11200-M4	2CT11400-M4
M5	2CT11000-M5	2CT11200-M5	2CT11400-M5
M6	2CT11000-M6	2CT11200-M6	2CT11400-M6
M8X1.25	2CT11000-M8	2CT11200-M8	2CT11400-M8

Kato Tangless Air Tool FEA are designed specifically for installation of 1, 1.5 & 2 Dia. length inserts only.

For additional technical data on KATO Air Tools click here.

Choose a Category