| |
KATO Products |
| |
|
|
| |
|
| |
| New Low Cost AC Electric
Driver for installing Kato Tangless Inserts!
This driver
is designed for customers whose insert volume may be too much for hand tool
installation, but not quite enough not justify the cost of air tool or
electric drivers with transformers. The new low cost electric driver
retails for approximately 60% less than the electric drivers with
transformer! |
|
|
|
 |
|
|
| |
|
|
| |
|
|
|
KATO Removal Tools For Tangless CoilThread Inserts |
|
|
|
KATO tangless removal tools offer quick, non-destructive removal
of tangless inserts, preventing damage to castings. The KATO
removal tools may also be used to back out inserts that were
installed to deep.
Special Notes:
- The KATO Tangless CT1600R series
of removal tools can be used for both manual and electric
removal. For electric use remove the removal mandrel from the
red/blue handle, and insert it
into one of the KATO electric
drivers.
- A spare pawl, spring, and pin
are included with every CT1600R series removal tool (except
metric sizes). The spare parts are packaged in at plastic
tube, and are located in the back of the blue handle.
- Wrenches for setting the
adjusting sleeve are also packaged with every CT1600R series
removal tool (except metric sizes).
|
|
|
Nominal
Thread
Size |
Removal
Tool |
Replacement
Mandrel |
Replacement
Pawl |
Replacement
Pawl Kit |
| UNC
- UNIFIED COARSE |
| 2-56 |
CT16002R-02 |
CT16410-02 |
CT16402R-02 |
CT16402R-02K |
| 4-40 |
CT16002R-04 |
CT16410-04 |
CT16402R-04 |
CT16402R-04K |
| 6-32 |
CT16002R-06 |
CT16410-06 |
CT16402R-06 |
CT16402R-06K |
| 8-32 |
CT16002R-2 |
CT16410-2 |
CT16402R-2 |
CT16402R-2K |
| 10-24 |
CT16002R-3 |
CT16410R-3 |
CT16402R-3 |
CT16402R-3K |
| 1/4-20 |
CT16002R-4 |
CT16410R-4 |
CT16402R-4 |
CT16402R-4K |
| UNF
- UNIFIED FINE |
| 10-32 |
CT16003R-3 |
CT16411R-3 |
CT16403R-3 |
CT16403R-3K |
|
1/4-28 |
CT16003R-4 |
CT16411R-4 |
CT16403R-4 |
CT16403R-4K |
| METRIC |
| M2.5 |
CT16002R-M2.5F |
N/A |
CT16402R-M2.5 |
N/A |
| M3 |
CT16002R-M3F |
N/A |
CT16402R-M3 |
N/A |
| M4 |
CT16002R-M4F |
N/A |
CT16402R-M4 |
N/A |
| M5 |
CT16002R-M5F |
N/A |
CT16402R-M5 |
N/A |
| M6 |
CT16002R-M6F |
N/A |
CT16402R-M6 |
N/A |
| M8X1.25 |
CT16002R-M8 |
N/A |
CT16402R-M8 |
N/A |
For additional technical data on KATO Electric Tools click here.
|
|
