KATO FASTENING SYSTEMS, INC.		  

 

katonet.com

 

 
 

  KATO Products
 
   
 
New Low Cost AC Electric Driver for installing Kato Tangless Inserts!

This driver is designed for customers whose insert volume may be too much for hand tool installation, but not quite enough not justify the cost of air tool or electric drivers with transformers.  The new low cost electric driver retails for approximately 60% less than the electric drivers with transformer!
 

 
   
   

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 
KATO Air-Driven Installation Tools for Tangless CoilThread Inserts
 
 
 
 
  The air tool consist of three major components:
  1. The air motor
  2. The adapter
  3. The FEA (Front End Assembly)
Don't forget to order a Filter-Regulator-Lubricator (FRL) for each air motor.

Part Number:  CT25020

Special Notes:

  • All three components are required to install tangless inserts with the air tool.
  • Each thread size will require a different Front End Assembly (FEA).
  • A Filter-Regulator-Lubricator must be connected to each air motor in operation.
  • IMPORTANT:  For thread sizes 2-56, 4-40, M2.5 and M3 the Clutch Drive must be used to prevent the mandrels from breaking.
Nominal Thread Size FEA COMPONENTS Adapter Air Motor FRL
Front End Assembly Replacement
Mandrel
Assembly		 Replacement Pawl

UNC - UNIFIED COARSE
2-56 2CT11000-02 2CT11200-02 2CT11400-02 CT9605 CT25017 CT25020
4-40 2CT11000-04 2CT11200-04 2CT11400-04
6-32 2CT11000-06 2CT11200-06 2CT11400-06
8-32 2CT11000-2 2CT11200-2 2CT11400-2
10-24 2CT11000-3 2CT11200-3 2CT11400-3
1/4-20 2CT11000-4 2CT11200-4 2CT11400-4
5/16-18 2CT11000-5 2CT11200-5 2CT11400-5 CT9705
3/8-16 2CT11000-6 2CT11200-6 2CT11400-6

UNF - UNIFIED FINE
10-32 2CT11001-3A 2CT11201-3A 2CT11401-3A CT9605 CT25017 CT25020
1/4-28 2CT11001-4 2CT11201-4 2CT11401-4
5/16-24 2CT11001-5 2CT11201-5 2CT11401-5 CT9705
3/8-24 2CT11001-6 2CT11201-6 2CT11401-6

METRIC
M2.5 2CT11000-M2.5 2CT11200-M2.5 2CT11400-M2.5 CT9605 CT25017 CT25020
M3 2CT11000-M3 2CT11200-M3 2CT11400-M3
M4 2CT11000-M4 2CT11200-M4 2CT11400-M4
M5 2CT11000-M5 2CT11200-M5 2CT11400-M5
M6 2CT11000-M6 2CT11200-M6 2CT11400-M6
M8X1.25 2CT11000-M8 2CT11200-M8 2CT11400-M8

Kato Tangless Air Tool FEA are designed specifically for installation of 1, 1.5 & 2 Dia. length inserts only.

For additional technical data on KATO Air Tools click here.